Close
With an experience in designing and manufacturing pipe belts for over fifteen years, ORIENTAL has been taking a proactive role in promoting the use of Pipe belts which are tailor-made to suit the installation requirement. ORIENTAL, designs pipe belts with wide range of reinforcement (textile and /or steel) to meet the customer demands
Runs in the shape of a pipe as an enclosed belt, thereby preventing spillage
Negotiates sharper curves and traverse difficult and restricted terrain
Eliminates transfer points
Saves space and structural costs
Can carry material on return conveyor
Prevents material pilferage
Pipe belt is applicable to all industries. Tonnage of material to transport, types of material to handle, availability of space, angle of inclination decide pipe diameter, cover grades and suitability of specific reinforcement materials. Normally industries like Cement, Chemical & Fertilizers, Power & Steel, Ports, Mines are common user’s of Pipe belts.
| Common Widths : | 500 mm to 2600 mm (20” to 102”) for EP/NN | 800 mm to 2400 mm (32″ to 94″) for ST |
| Carcass Variety Available : | EP / NN, MAXX ROCK®, MAXX ARMOUR®, MAXX STEELFLEX® |
| Common Belt Rating : | 250 to 3150 kN/m (150 to 1800 PIW) | ST500 to ST5400 kN/m (270 to 3000 PIW) |
| No. of Plies : | 1 ply to 5 ply |
| Rubber Cover Compounds : | M24, DIN W, DIN X, High Abrasion Resistant (HAR), Super Abrasion Resistant(SAR) and Other grades as per request. |
| Rubber Cover Thickness : | 2 mm to 25 mm (1/16” to 1”) |
| Angle of Inclination* : | Upto 26° |
| Edge : | Moulded Edge |
| Splicing Method : | Hot |
| Belt Identification : | Unique Product Identification Number (PIN) at every 10 Mtr (33’) |
| * For higher angle of Inclination refer ORIENTAL Technical Service Representative | |
